ALS is proud to partner with Weber to assist with your airfield lighting mortar and grouting requirements on projects.
Inset light fixtures are commonly installed in concrete runways by coring a shallow opening in the existing pavement and then bonding the fixture to the pavement with an epoxy or polyester adhesive. Channels wide enough to accommodate the wires are sawn into the pavement and the conductors are laid in and covered with the epoxy or polyester material.
Webertec Bedding Mortar
Is a three-component, polyester-based mortar for the bedding and fixing of airport landing lights. It has been formulated for easy mixing and placement, even at low temperatures and, when cured, provides a durable, chemically resistant bedding and fixing material with good bond strength. Available in standard and winter grades.
Webertec Grout FG
Is a three-component polyester grout for anchoring and fixing. It is fast-setting for rapid installation and can be used down to 0°C. It is a flowing grout to fill gaps of between 5mm up to 90mm dependent upon bulking out with aggregate. Available in standard and winter grades and 2 colours: grey for concrete and black for asphalt.
