Airfield Lighting Systems WAGGY LED high intensity runway guard light, 6.6A or 230VAC.
One of the installations required for prevention of runway incursions is the Runway Guard Lights (RGL), also referred to as “Wig-Wag”. These should under certain conditions be installed on every taxiway connected to the runway as the last resort to remind a flight crew that they must have a clearance to continue before entering an active runway.
The elevated Runway Guard Light WAGGY is the answer to these problems.
Based on a new generation of LEDs and a revolutionary design both in size and light output, WAGGY is a perfect choice, it also has a specific flashing pattern exhibiting crisp ON and OFF status.
IEC61827
Section 4.2.2 Elevated Luminaires
The overall height of an elevated luminaire intended to be used within the runway or taxiway safety area shall not exceed 350mm above pavement except for heliports where the height limit shall be 250mm. In case of RGL, the height shall not exceed 650mm.
These heights could be increased with the approval of the competent aerodrome authority.
We offer two models of the RGL, one as below with low profile frangible brackets.
Features
- Designed and built with simplicity and ease of maintenance in mind. High power LED technology.
- Lightweight, low-energy and environmentally-friendly lighting fitting.
- Extensive use of aluminium alloys reduces fitting weight and eases handling in the field.
Environmental Data
Aspect | Data |
|---|---|
Temperature Range | -40° to +50⁰
|
Degree of Protection | IP65 |
Humidity | 0-100% |
Wind Speed | Up to 480 Km/h |
Technical Details
- Housing – Powder coated aluminium RAL 1004 (aviation yellow)
- Fastening system powder – coated aluminium, RAL 1004 (aviation yellow)
- Anti-glare visor powder – coated aluminium, RAL 9005 (gloss black)
- Dispenser – clear polycarbonate
- Cable gland – nickel plated brass
- Fasteners – stainless steel
The RGL will operate at 100% brightness during the day. During the night the RGL brightness will decrease to 10% intensity, according to figure A2- 24 si A2-25 ICAO Annex 14/2016
Optional: failure device – trigger alarm in case of one or more cluster fails
Dimensions
