Housing

The battery, charger and controller unit are enclosed in an powder coated, IP 54, metal case.

Solar Panel

Made of mono or poly crystalline silicon solar cells.

Resist environmental hazards such as hail, snow, ice, and storms.

Charger /Control unit

Standard controller or MPPT type for increased efficiency. The controller automatically turns on the beacon at night. The charger protects the battery from overcharging depending on the environment temperature.

Is designed to enhance the power system performance, providing effective battery charging whilst ensuring the demands of the load equipment are met.

Battery

The battery is not included for transport purposes.

System Skid

The sliding system is designed to provide the possibility of adjusting the incidence angle of the photo voltaic panel between 0° and 45°. The installation of the equipment is made on a vertical tube. The diameter of the tube may vary from 30mm to 80 mm.

IMPORTANT: The photovoltaic panel must be oriented towards South.

Temperature range:

-40° to +55° ,+80° on the surface of the photovoltaic panel

Degree of protection: IP 65

From this configurable solar power system the following types of beacons can be powered:

Low intensity obstruction light type A single or double – 1.5Wh. Low intensity obstruction light type B single or double – 3Wh.

Group of low intensity obstruction lights type A or type B, single or double. Medium intensity obstruction light type A – white light flashing – 30Wh. Medium intensity obstruction light type B – red light flashing -15Wh.

System Configuration Options:

Operating voltage: 12 V DC, 24 V DC, 48 VDC. Solar panel power output: from 30W up to 200W. Charger / Control unit type: standard or MPPT. Battery capacity: from 30Ah up to 200Ah